FG51-FG63 Rettifica volani
| FLYWHEEL AND CLUTCH PRESSURE PLATE GRINDER |
 |
|
FG51 it has been engineered specifically for resurfacing
flywheels and clutch pressure plates up to 510 mm (20”) diameter. The sturdy structure of the elements like basement, column and rotary table, assures the maximum level of rigidity and working precision. The machine is equipped with an efficient coolant system complete with pump and removable settling tank easy to clean. The wide standard equipment allows an extremely fast and accurate set-up of the workpieces. Moreover the FG51 is suitable for grinding brake discs of cars and trucks for which this kind of operation is requested. |
 |
| The grinding machine FG61 represents the most advanced solution in terms of clutch pressure plates and flywheels reconditioning of industrial or passenger vehicles. Due to its flexibility it is also suitable for a fine grinding of any other circular piece like discs, rings or flanges. Precision silicon carbide gaskets could be also ground by means of a diamond grindingwheel. Thanks to its updated machining system and to the use of strong material, like ripped cast iron on the base, on the head, on the rotary table and to the use of hardened and ground steel on the column, the machine gives an high sturdy rigidity. The rotary table has a diameter of 450 mm. and its upper surface is dove tailed in order to easily lock the pieces to be machined. Upon demand it could be coupled with a magnetic plate. Its rotation is done by slinding on to a fine ground surface constantly deeped into an oil bath thus reducing friction and wear and lasting, at the same time, the machine life. The taper grindwheel is driven by a powerful 4 kW motor in order to grant a quick grinding even with deep passes. |
SPECIFICHE TECNICHE
| SPECIFICATION |
FG51 |
| Maximum grinding diameter | 510 mm |
| Rotary table diameter | 390 mm |
| Maximum distance between table and wheel | 175 mm |
| Cup grinding wheel diameter | 150 mm |
| Table rotation speed | 16 rpm |
| Wheel rotation speed | 2860 rpm |
| Table motor power | 1 Hp (0.75 kW) |
| Head motor power | 3 Hp (2.2 kW) |
| Dimensions (LxLxH) | 700x970x1680 mm |
| Weight | 380 Kg |
| SPECIFICATION | FG63 |
| Maximum grinding diameter | 630 mm |
| Rotary table diameter | 450 mm |
| Maximum height table-wheel | 220 mm |
| Taper grinding wheel speed | 150 mm |
| Rotary table speed | 16 rpm |
| Grinding wheel speed | 2800 rpm |
| Power head motor RTV 600 / RTV 612 | 4 kW / 9 kW |
| Power table motor | 0,55 kW |
| Power rapid feed head motor | 0,18 kW |
| Dimensions (LxLxH) | 1200x900x1600 mm |
| Weight | 710 Kg |
